Brushless Inrunner Motor
 |
 E flite Park 400 Brushless Inrunner Motor 3700Kv  US $41.99
|
 E flite Park 400 Brushless Inrunner Motor 4200Kv US $41.99
|
 Himax HA2015 5400 RC Brushless Inrunner Motor 48g 110W US $39.99
|
 E flite RC Park 370 Brushless Inrunner Motor 3600Kv 11A US $37.99
|
 E flite RC Park 370 Brushless Inrunner Motor 4100Kv 13A US $37.99
|
 E Flite Park 370 Brushless Inrunner Motor 3600Kv EFLM1010 US $37.99
|
 E flite Park 370 Brushless Inrunner Motor 5400Kv US $37.99
|
 E flite Park 370 Brushless Inrunner Motor 4100Kv US $37.99
|
 E Flite Park 370 Brushless Inrunner Motor 4100Kv EFLM1000 US $37.99
|
 RC Model 2900 KV Inrunner Brushless Motor 30A ESC Speed Controller CA059 US $28.90
|
 RC Brushless Inrunner Motor 3656 KV1800 US $27.50
|
 New KDA 2040 31Turn L Brushless Inrunner Motor 1800Kv US $23.99
|
 RC Brushless Inrunner Motor K2445 KV 2350 US $18.75
|
 RC Brushless Inrunner Motor K2445 KV 2900 US $18.75
|
 RC Brushless Inrunner Motor K2445 KV 3800 US $18.75
|
 RC Brushless Inrunner Motor 2445 KV2350 US $18.75
|
 RC Brushless Inrunner Motor 2445 KV3800 US $15.50
|
 RC Brushless Inrunner Motor K2030 KV 3500 US $15.00
|
 RC Brushless Inrunner Motor K2030 KV 4300 US $15.00
|
 RC Brushless Inrunner Motor K2030 KV 5200 US $15.00
|
 RC Brushless Inrunner Motor 2040 KV2100 US $15.00
|
where can i learn how to wind an electric motor online?
im looking to learn how to wire a permanent magnet brushless inrunner motor, where can i learn what size copper wires at what lengths & how to wind them properly for my specific application?
Briefly, for the same motor, the torque is related to the current, which is determined from wire tables for the wire thickness and the allowed temperature rise for the insulation and magnets. The speed is determined by the voltage which depends on the number of turns.
Votage x current = electrical power. Speed x torque = mechanical power. Both are measured in watts.
It is likely there are too many unknowns for your purpose, but if it is already wound to a known specification, you could use the existing wires to adjust the parameters as above. The power could be the same with a different voltage and current. Measure the wire length, and the wire diameter with a micrometer. Rewind them and connect them in exactly the same way. Consider that the new wire has to fit in the same space. I have seen some articles on using video recorder motors as a small generator - see the link, which might help you in some way, and also look up video recorder motors..
I was able to wind a 240V shaded pole motor to 24 volts this way. It is probably better to buy a motor and controller that meets your specification and then adapt the supply to suit. The motor you are talking about will probably have 3 phases, and needs an appropriate electronic controller for the new voltage and current.
HobbyKing - Turnigy B3650-2300 Brushless Inrunner Motor
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.