Sub Micro Servos
 |
 20 X RC Sub Micro Servos 5g For Airplane Helicopter  US $71.99
|
 3 Hitec HS 56HB Feather Sub Micro Servo HS56 US $63.95
|
 JR DS287MGHV HV Digital Ultra Speed Sub Micro MG Servo US $59.99
|
 BD JR DS285MGHV HV Digital Hi Torque Sub Micro MG Servo US $49.99
|
 JR DS287MG Digital Ultra Sub Micro Servo JRPS287MG US $49.99
|
 DS285MG Hi Speed Sub Micro Servo FREE SHIPPING US $49.99
|
 Hitec HS 56HB JR RCD Sub Micro Servo HRC33056S US $39.95
|
 Spektrum H3000 Sub Micro Digital Heli Servo US $37.99
|
 NEW Airtronics Sub Micro Digital BB Servo 474502 NIB US $36.99
|
 9 X RC Sub Micro Servos 44g High Speed Torque Servo US $34.99
|
 E Flite 12g Sub Micro Servo EFLR7130 FREE SHIPPING US $34.99
|
 JR DS285 Digital Hi Speed Sub Micro Servo JRPS285 US $34.99
|
 9 x RC Sub Micro Servos 37g High Speed Torque Servo US $34.99
|
 JR DS290G Digital Ultra Speed Sub Micro Gyro Servo JRPS290G US $34.99
|
 JR DS285 Sub Micro Digital Servo JRPS285 T Rex 400 NEW US $34.99
|
 Spektrum H3000 Sub Micro Digital Heli Servo SPMSH3000 US $34.99
|
 4 Hitec HS 55 Economy Feather Sub Micro Servo HS55 US $34.95
|
 Hitec HS 55 Economy Feather Sub Micro Servo X4 COMBO US $34.95
|
 E Flite 9 Gram Sub Micro Servo EFLR7110 US $30.79
|
 E Flite 13g Sub Micro Servo EFLR7140 US $30.69
|
 JRPS285 DS285 Digital Hi Speed Sub Micro Servo US $29.99
|
 Four TP SG90 9 gram Sub Micro Servo US $28.99
|
 8 X RC Sub Micro Servos 5g For Airplane Helicopter US $28.99
|
 8 X RC Sub Micro Servos 5g High Speed Torque Servo New US $28.99
|
 E Flite 9 Gram Sub Micro Servo EFLR7110 FREE SHIPPING US $27.99
|
 NEW Hitec HS 5056MG Digital BB MG Sub Micro Servo 35056S NIB US $27.99
|
 EFLR110 9 Gram Sub Micro Servo US $27.99
|
 E Flite EFLR7110 Sub Micro Servo 9 Gram Blade CP Pro US $27.77
|
 E Flite EFLR7110 Sub Micro Servo 9 Gram Yak 54F New US $27.77
|
 E Flite EFLR7110 Sub Micro Servo R7110 Blade CX CX2 CX3 US $27.77
|
 E Flite EFLR7110 Sub Micro Servo R7110 Mini Edge New US $27.77
|
 E Flite EFLR7110 Sub Micro Servo R7110 Mini Funtana US $27.77
|
 E Flite EFLR7110 Sub Micro Servo R7110 Blade CP Pro US $27.77
|
 E Flite EFLR7110 Sub Micro Servo 9 Gr Blade CX CX2 CX3 US $27.77
|
 E Flite EFLR7110 Sub Micro Servo 9 Gram Mini Edge New US $27.77
|
 E Flite EFLR7110 Sub Micro Servo 9 Gram Mini Funtana US $27.77
|
 Hitec HS 56HB Karbonite Gear Sub Micro Servo HS56 56HB US $22.79
|
 Hitec HS 56HB Feather Sub Micro Servo HS56 US $22.69
|
 Hitec HS 5056MG Digital Ball Bearing Metal Gear Sub Micro Servo US $21.99
|
 A3030 SPEKTRUM SUB MICRO DIGITAL AIRCRAFT SERVO US $21.99
|
 SPEKTRUM SPMSA3030 SUB MICRO DIGITAL HT SERVO US $21.49
|
 Hitec HS 56HB Karbonite Gear Sub Micro Universal Servo HRC33056S US $21.29
|
 E Flite 35 Gram DS35 Digital Super Sub Micro Servo 24 US $19.99
|
 Hitec HS 5055MG Digital MG Sub Micro Servo US $19.99
|
 JR Sport SM22 Hi Speed Sub Micro Servo JSP20021 US $19.99
|
 Spektrum DSP60J Digital Programmable Sub Micro Servo Sx US $19.46
|
 JR ES375 Sub Micro Servo New US $19.00
|
 E Flite 60 Gram DS60 Digital Super Sub Micro Servo EFLRDS60 US $18.99
|
 Hitec HS 5055MG Digital Metal Gear Sub Micro Servo US $18.95
|
 SPMSA3010 A3010 Sub Micro Digital High Speed Aircraft Servo US $18.49
|
 E Flite 76 Gram DS76 Digital Sub Micro Servo 24ghz US $17.99
|
 76 Gram DS76 Digital Sub Micro Servo US $17.99
|
 JR S185 Super High Speed Sub Micro 6 Gram Servo JRPS185 US $17.99
|
 E flite 76 Gram DS76 Digital Sub Micro Servo EFLRDS76 US $17.99
|
E-Flite S75 Servo to DC Geared Motor Conversion?
Hopefully someone can help. I have a E-Flite S75 Sub-Micro servo and I am trying to convert it to a DC geared motor. I read "Ted Pavlic's Servo Motor Conversion" on the net but it is vague and now that the servo is apart I don't know what to do. The servo motor has 3 wires red, black and blue. As well, this connects to the circuit board then to the pot (I assume). Now do I cut out the board and pot wires out which only the motor remains? If so, what is the blue wire on the motor for (signal?) should this be cut too? Any help would be appreciated. I just want to use the servo as a regular DC motor. Please...I'm not a whiz at this stuff can someone explain to me what to do in easy to understand language. Many Thanks!
The servo works by using a signal that represents a particular position, and angle that ranges from the servos extreme positions, this is important because the servo determines its current position using the pot, you'll notice that the pot has a key that fits into the gear that you attach the servo arm to.
you need to modify the pot so that it cannot turn, the simplest way would be to cut the pot's shaft or "knob" to a point that it does not reach the gear. The servo will now think that it is still in whatever position you leave the pot at before you close it back up. What you'll want to do is center your transmitter, and turn the servo on, and then turn the pot so that servo stop moving the motor in either direction, you have now calibrated center, or zero acceleration on this particular servo.
Next you need to modify either the main servo arm gear, or the casing so that the main servo arm gear can freely rotate over 360 degrees, continuously. There are physical plastic stoppers on the gear and on the enclosure casing, one or both of these need to be removed, or the servo will not be free to continuously rotate.
next reassemble the servo making sure that the pot will not be moved any more by the rotating of the main servo arm gear, if the servo is working just right for your application, then consider adding a small amount of glue onto the pot's shaft to make sure it doesn't wiggle into another position which will off-center it and make it run continuously.. you transmitter (controller) may also have center adjustments that will change the signal's center position as will, also fixing this calibration problem.
TEAM DIGITAL DCC CONTROLLER SMC 4 SERVO E FLITE S75 Sub Micro
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.